" />

Polyvinyl Acetate - The Leading Polyvinyl Acetate Manufactory

Subtitle

Material Saftey Data Sheet (MSDS)

according to Regulation (EC) No. 1907/2006
Version 4.0 Revision Date 22.01.2011

GENERIC EU MSDS - NO COUNTRY SPECIFIC DATA - NO OEL DATA
1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
1.1 Product identifiers

Product name : Polyvinyl Acetate
Product Number : YY PVAC
Brand : YYPVAC
CAS-No. : 9003-20-7
1.2 Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances
1.3 Details of the supplier of the safety data sheet
Company : Yingyang Gumbase Materials Ltd
11-512 Hubin Street, 200031 Wuxi
CHINA
Telephone : +86 150 61500815
Fax : +86 510 85169386
E-mail address : [email protected]

1.4 Emergency telephone number
Emergency Phone # : +86 150 61500815
2. HAZARDS IDENTIFICATION
2.1 Classification of the substance or mixture

Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008
This substance is not classified as dangerous according to Directive 67/548/EEC.
2.2 Label elements
Caution - substance not yet tested completely.
2.3 Other hazards - none
3. COMPOSITION/INFORMATION ON INGREDIENTS
3.1 Substances
Formula : C4H6O2
Component Concentration
Acetic acid ethenyl ester, homopolymer
CAS-No.
9003-20-7
-
4. FIRST AID MEASURES
4.1 Description of first aid measures
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration.
Aldrich - 430439 Page 2 of 6
In case of skin contact
Wash off with soap and plenty of water.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water.
4.2 Most important symptoms and effects, both acute and delayed
4.3 Indication of immediate medical attention and special treatment needed
no data available
5. FIRE-FIGHTING MEASURES
5.1 Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 Special hazards arising from the substance or mixture
Carbon oxides
5.3 Precautions for fire-fighters
Wear self contained breathing apparatus for fire fighting if necessary.
5.4 Further information
no data available
6. ACCIDENTAL RELEASE MEASURES
6.1 Personal precautions, protective equipment and emergency procedures
Avoid dust formation. Avoid breathing vapors, mist or gas.
6.2 Environmental precautions
Do not let product enter drains.
6.3 Methods and materials for containment and cleaning up
Sweep up and shovel. Keep in suitable, closed containers for disposal.
6.4 Reference to other sections
For disposal see section 13.
7. HANDLING AND STORAGE
7.1 Precautions for safe handling
Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire
protection.
7.2 Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
7.3 Specific end uses
no data available
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 Control parameters
Components with workplace control parameters
8.2 Exposure controls
Appropriate engineering controls
General industrial hygiene practice.
Aldrich - 430439 Page 3 of 6
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate government standards
such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the
standard EN 374 derived from it.
Body Protection
Choose body protection in relation to its type, to the concentration and amount of dangerous
substances, and to the specific work-place., The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired,
use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US) or CEN (EU).
9. PHYSICAL AND CHEMICAL PROPERTIES
9.1 Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odour no data available
c) Odour Threshold no data available
d) pH no data available
e) Melting/freezing point no data available
f) Initial boiling point and
boiling range
no data available
g) Flash point no data available
h) Evaporation rate no data available
i) Flammability (solid, gas) no data available
j) Upper/lower
flammability or
explosive limits
no data available
k) Vapour pressure no data available
l) Vapour density no data available
m) Relative density 1,18 g/mL at 25 °C
n) Water solubility no data available
o) Partition coefficient: noctanol/
water
no data available
p) Autoignition
temperature
427 °C
q) Decomposition
temperature
no data available
r) Viscosity no data available
s) Explosive properties no data available
Aldrich - 430439 Page 4 of 6
t) Oxidizing properties no data available
9.2 Other safety information
no data available
10. STABILITY AND REACTIVITY
10.1 Reactivity
no data available
10.2 Chemical stability
no data available
10.3 Possibility of hazardous reactions
no data available
10.4 Conditions to avoid
no data available
10.5 Incompatible materials
Strong oxidizing agents, Strong bases
10.6 Hazardous decomposition products
Other decomposition products - no data available
11. TOXICOLOGICAL INFORMATION
11.1 Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation May be harmful if inhaled. May cause respiratory tract irritation.
Ingestion May be harmful if swallowed.
Skin May be harmful if absorbed through skin. May cause skin irritation.
Eyes May cause eye irritation.
Aldrich - 430439 Page 5 of 6
Additional Information
RTECS: Not available
12. ECOLOGICAL INFORMATION
12.1 Toxicity
no data available
12.2 Persistence and degradability
no data available
12.3 Bioaccumulative potential
no data available
12.4 Mobility in soil
no data available
12.5 Results of PBT and vPvB assessment
no data available
12.6 Other adverse effects
no data available
13. DISPOSAL CONSIDERATIONS
13.1 Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.
14. TRANSPORT INFORMATION
14.1 UN-Number
ADR/RID: - IMDG: - IATA: -
14.2 UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
14.3 Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
14.4 Packaging group
ADR/RID: - IMDG: - IATA: -
14.5 Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
14.6 Special precautions for users
no data available
15. REGULATORY INFORMATION
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
15.2 Chemical Safety Assessment
no data available
Aldrich - 430439 Page 6 of 6
16. OTHER INFORMATION
Further information Copyright 2011 YY PVAC License granted to make unlimited paper copies for internal use only.
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. YY PVAC shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale.

Featured applicaitons of polyvinyl acetate (pvac)

Some Featured Applications of our PVAC Solid :

1. Polyvinyl Acetate for SMC/BMC Products in FRP (Glassfiber Reinforcedd Plastics): to improve the Glossness, Anti-shrink, and the Stress and strain. Like applications in making Auto Head Lamps.

2. Polyvinyl Acetate in Cement Concrete: Add into the Cement to improve the performance in Water Proof, Anti-shrink, and Anti-Fatigue.

3. Polyvinyl Acetate in Adhesives: As a key material in the Adhesive industries for Timber products, Stationeries, Plastic articles, Paper making etc.

 4. Polyvinyl Acetate in Color Coating: used in the coatings for wires. It has a amazing function in Seizing the colors on the surfaces. Like Wires, Bill Boards, AD boards etc.

5. Polyvinyl Acetate in Gumbase: As a main element in Gumbase for chewing gumbase, bubble gumbase and xylitol.

Recent Blog Entries